(17IO) AP620D/AP620DP ELECTRIC PUMP ENGLISH 4.875” X 7.25” 04/20/2023
17
IO
SAVE THESE INSTRUCTIONS
Page 2
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Due to a policy of continuous product improvement, Intex reserves the right to change
specifications and appearance, which may result in updates to the instruction manual,
without notice.
PARTS REFERENCE
OPERATING INSTRUCTIONS
General
• Air beds are designed for temporary use and are NOT designed to be a replacement for
a traditional mattress.
• Make sure the area is flat, level, clean and free from sharp objects, and within reach of
an electrical outlet.
• To prevent puncture or damage to the air bed, never drag the air bed across the floor. Lift
the inflated air bed when moving or changing location.
• No air pump maintenance is required. Pump is removable.
• For cleaning use only clean cloth with mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches. For flocked surfaces:
rub away the flocking material with an eraser first before applying the glue and/or patch.
Part Descriptions:
1. Pump holder frame
2. Pump removal tab
3. Cord compartment
4. AC power cord
5. Manual inflation port cap
6. Manual inflation port
7. Cord compartment cover
8. Air passage
9. Control dial
10. Air bed front
11. Closed / Pump Off Position
2
3
4
5
6
7
1
8
10
9
11
To Next Page
Loading...
Need help?
General
