(335IO) LED WATERFALL ENGLISH SIZE: 4.875” X 7.25” 08/08/2017
English
335
IO
SAVE THESE INSTRUCTIONS
Page 3
4.
For pools with plunger valve and 38mm (1.5 in) hose:
a. Close the water outlet plunger valve.
b. Make sure the pump is off and disconnect the pump return hose from the
pool inlet plunger valve.
c. Remove the pool inlet plunger valve from the inlet threaded connector.
This plunger valve will not be needed, store in a safe place.
d. Attached the bypass valve
(5)
to the pool inlet threaded connector and
tighten the collar nut by hand.
e. Reconnect the pump return hose to the bypass valve
(5)
lower port.
See
fig 4.
FIG (1) FIG (2) FIG (3)
1
2
1
2
FIG (4)
Pool
Waterfall
Pump
8
5
To Next Page
Loading...
General