Intex Excursion Pro K1 User Manual

(94PO) “NMMA” KAYAK ENGLISH 4.875” X 7.25” 05/19/2021
SAVE THESE INSTRUCTIONS
Page 7
94
PO
Paddle Assembly:
1. Press and align the push-bottom on the short shaft with the paddle blade hole,
ensure the push-bottom is securely snapped onto the paddle blade hole.
2. Join the 3 shafts together with the couplers and securely tighten the coupler covers.
3. To disassemble, reverse the assembly steps.
Note:
is not necessary to detach the
paddle blades from the shafts.
Safety and Operating Instructions
Before Departing from the Shore or Dock
Know all required information and inform your passengers:
• Take a boating safety course and get hands-on training from your boat dealer or local
boating authorities.
• Know all local regulations and hazards related to water activities and boat operation.
• Check weather forecast, local currents, tides and wind conditions.
• Advise someone on land of the time you plan to be back at your starting point.
• Explain basic boat operation to all passengers.
• Children and non-swimmers need special instructions in the use of life jacket or personal
floatation devices (PFD).
• Be sure that one of your passengers can operate the boat in case of emergency.
• Learn how to determine the distance you can cover, and remember that bad weather
conditions can alter this.
• Review all safety requirements regularly.
Check the working condition of the boat and equipments:
• Check inflation pressure.
• Inspect the valves caps.
• Check the load is evenly distributed, fore (front) to aft (back) and side-to-side.
1
2
84" (213 cm)
4
86" (218 cm)
1 2
3
A
B C

Intex Excursion Pro K1 Specifications

General

Type	Inflatable kayak
Number of persons	1 person(s)
Maximum weight capacity	100 kg
Package type	Box
Product color	Grey, Red
Removable seat	Yes
Number of seats	1 seat(s)
Housing material	Polyvinyl chloride (PVC), Vinyl
Oar length	2.18 m
Oar material	Aluminum
Number of oars included	1

Weight and Dimensions

Depth	460 mm
Width	910 mm
Length	3050 mm