Intex FIBER-TECH User Manual

270
PO
4.875” X 7.25” 06/13/2018
270
PO
4.875” X 7.25” 06/13/2018
SAVE THESE INSTRUCTIONS
Page 1
IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL
INSTRUCTIONS BEFORE USING THIS PRODUCT
270-*PO-R0-1806
Proper inflation of the airbed.
The ambient temperatures of air have an effect on the airbed internal pressure. At low ambient
temperature the air will contract within the airbed and the airbed will feel softer: add air as necessary.
At high ambient temperature the air within the airbed will expand significantly and the airbed will
become hard and may burst: release air to avoid damage to the airbed or to soften the feel.
Do not
expose the airbed to extreme temperatures (hot or cold).
Air inside of bed may expand and contract with varying temperature leading to reduce pressure inside
of the bed. If this occurs, simply add more air using the pump to achieve desired firmness. If puncture
occurs, please refer to instruction. Repair kit/patch is enclosed. Stretching is a natural characteristic
of new vinyl. During initial use, the airbed may become soft and require additional inflation to maintain
desired firmness. This is normal for the first few days of use. Dimensions shown are approximate and
will vary due to the vinyl temperature and the air temperature.
In no event shall Intex, their authorized agents or employees be liable for damages (such as pin
holes) to the airbed caused by negligence, ordinary wear and tear, abuse and carelessness, or
external forces.
IMPORTANT NOTE
• NEVER PLACE AN INFANT TO SLEEP ON AIR MATTRESSES.
•
Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months to
sleep on this inflatable air mattress / air bed. Infants can suffocate on an underinflated or deflated
mattress, on bedding, by co-sleeping with another person, and by entrapment between the mattress
and bed frame or between the mattress and a vertical surface.
•
Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide
at least a shoulder width space between the inflatable mattress / airbed and adjacent vertical
surfaces such as walls, dressers or other objects.
•
Always keep the inflatable mattress fully inflated when in use.
•
Never introduce any flammable substance into the inflatable airbed, SUCH AS AEROSOL TIRE
REPAIR PRODUCTS, as it may ignite or explode.
•
This is not a toy. Children should be supervised to ensure that they do not play with the appliance/
airbed.
•
Do not walk, stand on or jump on or use the airbed as a trampoline.
•
Do not use on or near water. This is not a raft.
•
Do not set up bed near stairs, doors, sharp edges or breakable objects. Provide adequate space
between bed and objects to avoid entrapment.
•
Make sure the area is flat, smooth, even and free of sharp objects that could puncture the bed.
•
Keep pets away from the airbed. Pets may puncture the surface of the bed.
•
Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.
•
Recommended working pressure: 0.025bar (0.36psi).
FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION, PROPERTY
DAMAGE OR OTHER INJURY.
WARNING
INTEX
®
OWNER'S MANUAL
FIBER-TECH
TM
DURA-BEAM
TM
AIRBED
(270PO) FIBER-TECH
TM
DURA-BEAM
TM
AIRBED ENGLISH
(270PO) FIBER-TECH
TM
DURA-BEAM
TM
AIRBED ENGLISH
TO INFLATE
• Makesuretheairpumpinflationvalveinsertplugisproperly
positioned and the 2 in 1 exhaust valve cap is securely tightened.
• Pull2in1valvecaptoopen.
• Insertthenozzlefromanairpumpintothe2in1inflationvalve.
• Inflatetheproducttoapproximately80%ofdesiredfirmness.
CAUTION: To prevent bursting, do not over inflate or use
high pressure air compressor.
• Close2in1valvecapsecurelyafterinflation.
TO DEFLATE
• Pullout2in1valvecap.
• Pullinflationvalvebasetoreleaseair.
CAUTION: When opening, point the exhaust valve away from
any person.
• Replaceinflationvalvebaseandcapsecurely.
SAVE THESE INSTRUCTIONS
Page 2
MAINTENANCE
• Forcleaninguseonlymildsoapysolution.Donotuseanychemicals.
• Incaseofrepairs,useonlycommonPVCrepairglueandpatches.
STORAGE
1. Make sure the airbed is completely deflated, clean and dry.
2. Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs (1-5). Fold the
airbed loosely and avoid sharp bends, corners and creases which can damage the airbed.
3. Store in a safe, dry and cool place when not in use.
INTEX
INTEX
FIG (1) FIG (2) FIG (3) FIG (4) FIG (5)
INTEX
INTEX
INTEX
INTEX
INTEX
INTEX
INTEX
INTEX
©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays
souslicencede/Marcasregistradasutilizadasenalgunospaísesdelmundobajolicenciade/Warenzeichenverwendet
ineinigenLändernderWeltinLizenzvon/
Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box
28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801
•DistributedintheEuropean
Unionby/Distribuédansl’UnionEuropéennepar/DistribuidoenlauniónEuropeapor/VertriebinderEuropäischen
Union durch/
Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
DEFLATE
INFLATE

Intex FIBER-TECH Specifications

General

Brand	Intex
Model	FIBER-TECH
Category	Indoor Furnishing
Language	English