Intex Ladder User Manual

165
IO
SAVE THESE INSTRUCTIONS
Page 7
(165IO) 42”, 52" LADDER WITH REMOVABLE STEPS ENGLISH SIZE: 7.5” X 10.3” PANTONE 295U 09/16/2010
English
SETUP INSTRUCTIONS
LADDER SETUP
These assembly instructions are the same for the 3-step and 4-step
ladders. The assembly drawings show the 4-step ladder.
TOOLS REQUIRED: One (1) Phillips screwdriver
One (1) pair of pliers or a small adjustable wrench
IMPORTANT: Do not fully tighten fasterners until last assembly operation.
WARNING
ASSEMBLE THE LEGS BEFORE INSTALLING THE LADDER STEPS.
FAILURE TO ASSEMBLE THE LEGS BEFORE INSTALLING THE
STEPS MAY ALLOW THE LEGS TO SEPARATE FROM THE LADDER
DURING USE, POSSIBLY RESULTING IN SERIOUS INJURY OR
DEATH.
INCORRECTLY CONNECTED PARTS MAY RESULT IN AN UNSTABLE
LADDER OR LADDER FAILURE WHICH CAN CAUSE FALLING AND
PERSONAL INJURY OR DEATH.
1. SIDE C LEGS ASSEMBLY (refer to figures 1.1 through 1.4):
IMPORTANT: Make sure the legs are securely connected and locked. Check
the spring pins have snapped out before proceeding to the next step.
C
C
C
C
13
14
13
14
C
C
Spring pin
1.1
1.2
C
1
2
C
C
C
13
12
Press,
hold and
insert
1.3
1.4

Intex Ladder Specifications

General

Brand	Intex
Model	Ladder
Category	Lighting Equipment
Language	English