EasyManuals Logo
Home>Intex>Swimming Pool>Ultra XTR

Intex Ultra XTR User Manual

Intex Ultra XTR
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
119A
SAVE THESE INSTRUCTIONS
(119IO) ULTRA XTR™ RECTANGULAR / PRISM FRAME™ POOLS ENGLISH 7.5” X 10.3” PANTONE 295U 11/07/2018
English
Page 12
TROUBLESHOOTING
PROBLEM
DESCRIPTION
CAUSE
SOLUTION
ALGAE
COLORED
WATER
FLOATING
MATTER IN
WATER
CHRONIC LOW
WATER LEVEL
SEDIMENT ON
POOL BOTTOM
SURFACE
DEBRIS
Greenish water.
Green or black spots
on pool liner.
Pool liner is slippery
and/or has a bad odor.
Water turns blue,
brown, or black when
first treated with
chlorine.
Water is cloudy or
milky.
Level is lower than
on previous day.
Dirt or sand on pool
floor.
Leaves, insects etc.
Chlorine and pH level
need adjustment.
Copper, iron or
manganese in water
being oxidized by the
added chlorine.
"Hard water" caused by a
too high pH level.
Chlorine content is low.
Foreign matter in water.
Rip or hole in pool liner
or hoses.
Heavy use, getting in
and out of pool.
Pool too close to trees.
Super chlorinate with shock
treatment. Correct pH to your
pool store's recommended level.
Vacuum pool bottom.
Maintain proper chlorine level.
Adjust pH to recommended
level.
Run filter until water is clear.
Replace cartridge frequently.
Correct the pH level. Check with
your pool dealer for advice.
Check for proper chlorine level.
Clean or replace your filter
cartridge.
Repair with patch kit.
Finger tighten all caps.
Replace the hoses.
Use Intex pool vacuum to
clean bottom of pool.
Use Intex pool skimmer.
Water maintenance
The maintenance of a proper water balance through appropriate use of sanitizers is the single most
important factor in maximizing the life and appearance of the liner as well as ensuring clean, healthy
and safe water. Proper technique is important for testing and treating the pool water. See your pool
professional for chemical, test kits and testing procedures. Be sure to read and follow the written
instructions from the chemical manufacturer.
1
. Never let chlorine come in contact with the liner if it is not completely dissolved. Dissolve granular or
tablet chlorine first in a bucket of water, then add it to the pool water. Likewise with liquid chlorine; mix it
immediately and thoroughly with the pool water.
2
. Never mix chemicals together. Add the chemicals to the pool water separately. Thoroughly dissolve each
chemical before adding another one to the water.
3.
An Intex pool skimmer and an Intex pool vacuum are available to assist in maintaining clean pool water.
See your pool dealer for these pool accessories.
4.
Do not use a pressure washer to clean the pool.
POOL MAINTENANCE & CHEMICALS
REMEMBER TO
• Protect all pool occupants from possible water-related illnesses by keeping the pool water
clean and sanitized. Do not swallow the pool water. Always practice good hygiene.
• Keepyourpoolcleanandclear.Thepoolfloormustbevisibleatalltimesfromtheoutside
barrier of the pool.
• Keepchildrenawayfrompoolcoverstoavoidentanglement,drowning,orotherserious
injury.
WARNING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intex Ultra XTR and is the answer not in the manual?

Intex Ultra XTR Specifications

General IconGeneral
BrandIntex
ModelUltra XTR
CategorySwimming Pool
LanguageEnglish

Related product manuals