Maintain Roomba
Perform these maintenance tasks as needed
See Owner’s Manual for detailed
product instructions.
Instructional videos are available at
www.irobot.com/videos.
© 2009 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730. All rights reserved.
iRobot, Roomba, Virtual Wall and Home Base are registered trademarks of iRobot
Corporation. [00055.1110.v2]
U.S. Pat. Nos. D556,961 | 6,594,844 | 6,690,134 | 6,809,490 | 6,883,201 | 6,956,348 |
7,155,308 | 7,173,391 | 7,196,487 | 7,288,912 | 7,332,890 | 7,388,343 | 7,389,156 |
7,429,843 | 7,430,455 | 7,441,298 | 7,441,298 | 7,448,113. Additional patents pending.
1
Remove and empty
Roomba’s bin after each use
2
Clean Roomba’s filter
3
Clean Roomba’s brushes
A. Remove brush guard by lifting
both yellow tabs.
B. Remove Roomba’s brushes. Remove
Roomba’s brush caps and use the
included cleaning tool to easily remove
hair from Roomba’s bristle brush by
pulling it over the brush.
C. Remove and clean the hair and dirt
from Roomba’s yellow brush bearings.
*Replace filter every two months.
iRobot
®
Roomba
®
Quick Start Guide
Press button and
pull to remove
bin.
Flexible
Brush
Brush Bearings
Main
Brush
Brush Caps
A. Empty bin
B. Pull Yellow tab to
open and empty
filter compartment
Push down and remove filter to clean.
AeroVac™ (564 model only)
To Next Page
Need help?
General
