Maintenance
Guide
To keep Roomba running
at peak performance,
it is recommended
that
you
perform
the following
maintenance
tasks after every
use:
o
[:ffi=ll"""ry
e
F#:lj;"ilii:.*
€)
55:lRoomba's
a. Press button
and
pull
to remove bin.
Clean Roomba's
brushes
a. Remove brush
guard
by
pushing
both
tabs.
b. Remove the brush end caps and
use
scissors or the cleaninq tool
to cut
any hair wrapped
arou-nd the brushes.
c. Remove and clean hair
and dirt
from Roomba's
brush bearings.
b. Clean the area inside
the
robot
and
replace wheel in reverse
order.
Clean Roomba's
front wheel
Remove the front wheel
assembly
module by
pulling
firmly on
the
wheel assemblv. Remove
tfre
wheel
by
pulling
it away from the assembly.
({t.,
IY
a. Unscrew side brush cap and
remove
any trapped hair or dust,
Click
brush back into
position
and
gently
tighten screw.
a. Clean or replace filter
-
ifwashed,
don't
put
back until dry.
b. Clean filter compartment.
Clean
Roomba's
sensors
b. Contact points
for home
base
6si|
!ii:??:i{sffiil:i3:"J?t
:?rb%, *,
_:-
Salton
Nl
Customer Service 05OB 629 777
530 MG 171209
www.irobot.com www.roomba.Gom.au
To Next Page
Need help?
General
