Name: Iron Baltic ATV Series
Brand: Iron Baltic
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4. Remove and replace the worn belts. Put / turn the belts on to the wheels one at

a time.

5. Tighten the belts by turning the tensioning pulley arm back until belts tightened

up to a position where they still can be compressed 10-15mm by hand

(measured in between pulley and the counter run belt).

Specifications / measurement of the

belts used can be found on the belts

housing cover or on the first page of

this manual.

Questions and Answers:

Need help?

Do you have a question about the Iron Baltic ATV Series and is the answer not in the manual?

Iron Baltic ATV Series Specifications

General