ITech IT6300 User Manual

Output Commands
Copyright© Itech Electronic Co., Ltd. 28
Chapter4 Output Commands
OUTPut[:STATe][:ALL]
This command is used to control the output switch state.
Command syntax
OUTPut [:STATe] <bool>
Arguments
0|1|ON|OFF
*RST Value
OFF
Query syntax
OUTPut:STATe[:ALL]?
Returns
0|1
OUTPut:TIMer[:STATe]
This command is used to control the status of the power output timer.
Command syntax
OUTPut:TIMer[:STATe] <bool>
Arguments
0|1|ON|OFF
*RST Value
OFF
Query syntax
OUTPut:TIMer:STATe?
Returns
0|1
OUTPut:TIMer:DELay
This command is used to set the delay time of the timer.
Command syntax
OUTPut:TIMer:DELay <NR1>

ITech IT6300 Specifications

General

Brand	ITech
Model	IT6300
Category	Power Supply
Language	English