ITech IT6512C User Manual

Quick Start
Copyright© Itech Electronics Co., Ltd. 10
Chapter2 Quick Start
This chapter introduces power-on check steps of IT6500C series to ensure
normal start-up and usage under initialization status. This part also introduces
the front panel, the rear panel, key functions and VFD display function of the
power supply, make sure that you can quickly know the appearance, instruction
and the key function before you operate the power supply. Help you make
better use of this series of power supply.
2.1 Brief Introduction
With ITECH latest technology, the IT6500C series offers a full-featured
high-performance power test solution. With fast response these DC power
supplies provide users with a new level of power supply performance. The
whole series include more than 100 models. The maximum output voltage and
current is up to 1000V and 1200A respectively. With its auto ranging capability,
it also has a super wide range of voltage and current applications. Users can
choose the power supply that fits their testing requirements perfectly.
IT6500C Series power supply is featured with:
 Low ripple and low noise
 High Resolution Display
 Built-in internal electronic load and also used as external load
 Working with power dissipater unit, expanding load ability up to 300%
 The 2-quadrant current output ability provides seamless switching across
two quadrants
 CC & CV Priority Function, Fast curves changing without overshoot
 Flexible and simple programming the parameters of source and load
 Supporting with power supply CV/CC/CP modes and electronic load
CC/CP modes
 Programming the resistance value
 parallel function, active current averaging and expandable power output
capacity
 Sequence programming (List mode)
 Built-in DIN40839 & ISO-16750-2 test sequences
 Solar panel I-V curve simulation function
 Adjustable rising time and falling time speed and independent time setting
in various mode
 Fully protections as OVP, OCP, OTP and OPP for source, OCP, OPP and
OTP for load, ORVS, UVP and so on.
 Analog Control Interface and remote sense
 Intelligent fans control
 High visibility vacuum fluorescent display (VFD)
 RS232/USB/GPIB /LAN/CAN standard interfaces
Model
Rated value
Rated value of internal
load
Height
IT6512C
80V/120A/1800W
50A/150W
2U
IT6513C
200V/60A/1800W
25A/150W
IT6514C
360V/30A/1800W
12.5A/150W

ITech IT6512C Specifications

General

Brand	ITech
Model	IT6512C
Category	Power Supply
Language	English