Inspection and Installation
Copyright© Itech Electronics Co., Ltd. 1
Chapter1 Inspection and Installation
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect
with the appearance of the items, contact the dealer from which you purchased
the instrument immediately. The package contents include:
Checklist of Package Contents
Item Qty. Model Remarks
IT6500C power
supply
IT6512C/IT6513C/IT6514C/IT6515C/
IT6516C/IT6517C/
IT6522C/IT6523C/IT6524C/IT6525C/
IT6526C/IT6527C/
IT6532C/IT6533C/IT6534C/IT6535C/
IT6536C/IT6537C
/IT6542C/IT6543C/IT6544C/IT6545C
/IT6546C/IT6547C
/IT6552C/IT6553C/IT6554C/IT6555C
/IT6556C/IT6557C
/IT6562C/IT6563C/IT6564C/IT6565C
/IT6566C/IT6567C
/6572C/IT6573C/IT6574C/IT6575C/I
T6576C/IT6577C
/IT6582C/IT6583C/IT6584C/IT6585C
/IT6586C/IT6587C/
IT6592C/IT6593C/IT6594C/IT6595C/
Number of the power cords vary
depending on the model,
See the Section Connecting the
Power Cord for power cord
This accessory is selected when
the USB interface is used for
starting up remote operation.
It contains power supply User’s
Manual, Programming Guide and
other user documentations.
It is the test report of the instrument
before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met.
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the power supply size.
IT6500C series power supply different models are not the same size, the detail
size of the power supply are shown as below.