To Next Page

To Previous Page

Function and Features

 RECALL

1. Press [Recall] key and press 9 (to select from which group the data is

recalled).

5.8949V 0.99994A

5.89W cc=1.000A

Memory function

When you want to recall the data saved in the memory, you should set memory

group in the system menu first.

Group 0 means you can recall data saved in 0-10 groups. Group 1 means you

can recall data saved in 11-20 groups. Group2-Group 9 can be concluded in the

same manner.

3.16 VON function

When testing some power products with slow voltage rise speed, if the

electronic load input is opened before power, the power may latch protection. In

this way, the user may set VON value. The electronic load only latches when

power voltage is higher than this value.

Press [Shift]+ 6 keys to enter configuration menu. Set voltage value in Voltage

on under configuration menu to control on/off status of electronic load. When

VON LATCH function is started, it indicates that Von Point latches load status.

NOTE

Please confirm whether it is necessary to set loading voltage, a step that provides

convenience for limiting working voltage value. If not necessary, do not set the loading

voltage without authorization to prevent unnecessary trouble from failure of loading.

If the instrument cannot load, please firstly check whether the VON function is set. If yes,

reset the Von value to minimum value (which may be directly set as 0. If minimum voltage

value of instrument is not 0, press 0 for confirmation and the menu will automatically set

the value as minimum value).

This function is invalid under CV mode.

When VON LATCH function is started, the load starts load test only when the

power voltage rises and is higher than Von Point loading voltage. When the

power voltage drops and is lower than Von Point unloading voltage, the load will

not unload.

ITech IT8800 User Manual

Other manuals for ITech IT8800