IVT 09PR-N User Manual

GB-9
ENGLISH
Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the PLAS-
MACLUSTER button.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp will
light up.
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp will
turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
PLASMACLUSTER OPERATION
SWING
CLEAN
FAN
MODE
SET/C
1h
DISPLAY
SELF CLEAN operation will reduce the
growth mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
.
1
Press the SELF CLEAN button when
the unit is not operating.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp will
light up.
• The unit will stop operation after 40 minutes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp will
turn off.
NOTE:
• You cannot set the temperature, fan speed, air
ow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.
SELF CLEAN OPERATION
1
SWING
CLEAN
FAN
MODE
SET/C
1h
DISPLAY
1

IVT 09PR-N Specifications

General

Brand	IVT
Model	09PR-N
Category	Heat Pump
Language	English