ADJUSTMENTS 10
en-50
10.3 FORWARD SPEED LIMIT SCREWS ___________________________________________
The cutting quality is improved at speeds lower than the full
transport speed of the mower. The local turf condition may require a
different speed.
To adjust the forward speed, adjust the speed limit screws at the
base of the steering control lever. Turn the screws to the right-side
to decrease the forward speed. Turn the screws toward the left side
to increase the forward speed.
Make certain the speed limit screws on both sides of the mower are
set to the same adjustment.
To Next Page
Loading...
Need help?
General
