6
Toilet
Flange
II
ASSEMBLY INSTRUCTIONS
1.
Install Floor Bolts
Insert floor flange brass bolts (II) into the toilet
flange (not included) with bolt heads down and
threaded ends facing up.
(Bolts should be parallel to wall and 6 in.
apart.)
Hardware Used
II
x 2
Floor Flange
Brass Bolt
Hardware Used
FF
x 1
2. Install Wax Ring
Turn bowl (B) upside down onto a towel or
cushioned surface. Place wax ring (FF) over
the raised outlet ring of the bowl (B). (If wax
ring (FF) has an integral plastic flange, be sure
flange taper points away from the toilet.) Press
firmly and slightly twist wax ring (FF) against
bottom of bowl (B) so the wax ring (FF)
adheres to the bowl (B).
1
2
FF
B
To Next Page
Loading...
General