J-200 Series
17.0 Optional Stereo Receiver Functions
DISP
A/PS
BND
SOURCE
UP
6
5
4
DN
RDM
MUTE
EQ/LD
SEL
PWR
3
2
RPT
INT
1
OPEN
AQUATIC
1
8 9 10 11 12 13 14 15 16 17
2
3
4 5 6 7
J-230, J-270 & J-280 Models Only:
To start enjoying your new stereo receiver, please read the following operation
instructions in their entirety.
Power Button: Press PWR (Power) to turn deck on or off.
Equalization Button: Repeatedly press EQ/LD to choose from DSP Off,
Jazz, Pop, Classic, Rock or Vocal equalization options. Press and hold EQ/
LD for 2 seconds to enable or disable the “LOUD” function.
Special Recommendation: After you have powered up your Aquatic AV
Audio System, we suggest you try one of the preset DSP (digital sound presets)
settings to customize the sound in your spas audio system. It’s easy, sim-
ply press the EQ/LD button (2) to activate the DSP. Then repeatedly press
to choose from Jazz, Pop, Classical, Rock and Vocal DSP settings. This will
enhance your listening experience and make it more enjoyable.
Mute Button: Press Mute to mute audio output. Press again to return to
previous volume level.
Open Button: Press Open to flip down the front access panel for CD
access. Gently insert CD into slot (DO NOT FORCE!) Make sure to close
the front panel to prevent damage to the unit. Note: never insert a wet or
moist CD since it may damage the mechanism and void the manufacturer
warranty.
A/PS Button: Press A/PS to scan station presets. The tuner will scan up,
wait for a few seconds, then continue. Once a desired station is found, press
A/PS a second time to cancel scan. To automatically scan and store station
presets, simply press and hold A/PS for several seconds, then release.
1.
2.
3.
4.
5.
42
To Next Page
Loading...
Need help?
General