Jam CLASSIC User Manual

EN 4
B – CONNECTING TO A DEVICE
Once turned on, the speaker will immediately search
for a device to pair to. If a device has not been
previously paired, the LED light on the top of the
speaker will ash red and blue alternatively. Enable
Bluetooth
®
on your device. From the Bluetooth
®
menu, select “JAM Classic”. When the device and
JAM Classic are connected, you will hear a tone and
the LED light will turn solid blue momentarily then
move to a slow ashing blue.
You may also connect your device to the “Classic”
speaker using an aux cable, which is not included.
Note: Once paired, the speaker will remember the
device every time it is turned on. To disconnect the
speaker from the device, press and hold the “play/
pause” button for 3 seconds. You will hear a tone
and the LED light at the top of the speaker will ash
red and blue. The “Classic” is now ready to pair to a
newdevice.
C – BUTTON FUNCTION
Quickly press the “play/pause” button once to play
your music.
To increase the volume, turn the volume dial
clockwise; to lower the volume, turn the volume
dialcounterclockwise.
To skip forward a track, quickly press the
button
once; to skip back a track, quickly press the
once.
...4s
JAM
Classic
JAM
Classic
...1x
...1x
...1x
...4s
JAM
Classic
JAM
Classic
...1x
...1x
...1x

Jam CLASSIC Specifications

General

Brand	Jam
Model	CLASSIC
Category	Speakers
Language	English