HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P370
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P370)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Double Down needs about 3 hours for up to 6 hours of party time.
The LED lights on your speaker let
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 5 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Double Down in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
The device and Bluetooth will find each other every time, as long as the speaker is set
to Bluetooth and your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that end. You’ll
have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If prompted,
enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and hold the
play/pause button for 3 seconds to activate pairing mode.
Note: If you turn on your JAM Double Down but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more, the Double
Down will automatically shut off to preserve battery power.
Note: You should never have to do this, but in the event the speaker controls are not
operable, press and hold the play/pause button for 3 seconds to reset the speaker.
Thank you for purchasing
the JAM Double Down.
Check out the sections
below for all the
important information
about your new speaker.
Pairing Mode
Bluetooth Light Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adapter not included.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
Bluetooth
®
Devices
JAM Double Down
on
>
5s
or
3h
1. Push it to play, push it again to pause
2. Turn the music down or go back a track
3. Turn the music up or jam on to the next track
4. This is the microphone
5. This is the power button
6. Check out how much juice is in the battery
7. Lets you know when Bluetooth is paired
8. Here’s where you hook it up old-school
9. The power cord goes here
Back:
8
9
3
5
2
6
7
1
4
To Next Page
Need help?
General
