To Next Page

To Previous Page

MAINTENANCE

CHANGING THE HEATING SET

Turn off the station.

Use a wrench to unscrew the cover.

FOLLOW THIS PROCESS INVERTED TO RE-CONNECT THE HEATING ELEMENT

This step has to be performed when the heating set is cold.

1. Untighten screw.

2. Separate the heating element from the heating set’s handle.

3. Connect the new heating element, pushing it’s extreme.

4. Insert screw to avoid air-loss which could reduce the heating element’s lifetime.

You will ﬁnd all the information about control unit JTE in our web site:

http://www.jbctools.com

Move back the cover. Pull the connector from the socket to disconnect the heating set from the station.

Follow this process inverted to re-connect the heating set.

Heating element

0006993 (230V) or

0007565 (120V)

Handle

0005390

Heating set

0005783 (230V) or

0007293 (120V)

jbc JT Series User Manual

Questions and Answers: