JBL 308P MkII User Manual

10
1
3
4
8
5
6
7
Front View Back View
2
FEATURES
1. HIGH FREQUENCY TRANSDUCER (TWEETER) – This transducer reproduces high frequency signals.
2. WAVEGUIDE – The specially designed JBL Image Control Waveguide enhances imaging and optimizes
the blend of direct and reected sound in the room, ensuring neutral sound at the mix position.
3. POWER LED – This LED illuminates when power is connected and the POWER switch is set to ON. Note
that after turning the power switch to the ON setting, there is a short delay prior to illumination of the LED.
4. LOW FREQUENCY TRANSDUCER (WOOFER) – This transducer reproduces low frequencies.
5. DUST DOME – Protects the inner circuit of the woofer. This self-repairing dust dome is resistant to dents
caused by ngers and objects.
6. LOW FREQUENCY PORT – The patented Slip Stream™ Port works in conjunction with the low frequency
transducer to provide accurate low frequency performance.
7. INPUT PANEL – This panel includes the power connector, input connectors, and user controls.
8. PADS – Four self-adhering pads are supplied with each studio monitor.
Section 4: 305P, 306P, and 308P MkII Powered Studio Monitors

JBL 308P MkII Specifications

General

Speaker type	2-way
Driver diameter	203 mm
Number of drivers	2
Speaker placement	-
Audio output channels	- channels
Sensitivity	92 dB
Frequency range	37 - 24000 Hz
RMS rated power	- W
Crossover frequency	1800 Hz
Signal-to-Noise Ratio (SNR)	75 dB
Total Harmonic Distortion (THD)	0.2 %
Product color	Black
Volume control	Rotary
Housing material	MDF
Amplifier class	D
Amplifier output power	56 W
AC (power) in	Yes
Connectivity technology	Wired
XLR/TRS in combo port	1
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 / 60 Hz
Package type	Box
Package depth	372 mm
Package width	326 mm
Package height	491 mm
Package weight	9400 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	308 mm
Width	254 mm
Height	419 mm
Weight	8100 g