To Next Page

To Previous Page

2. Using the Wireless Speakers

The JBL Bar 5.1 features two wireless surround speakers that

transform the soundbar to a full 5.1 surround sound experience.

The soundbar system will reproduce the experience you hear in the

movie theater and create an immersive music experience.

How to use your wireless surround speakers:

1. Detach the speakers from the main soundbar and freely place

them to the sides or behind the main seating area.

2. Note that the narrow side of the speaker emits the sound. Point

this side towards the listening location.

3. The wireless surround speaker volume level is set to a default

setting. Press the WIRELESS SURROUND +/- buttons on the

remote control to adjust the surround speaker volume level

1DUHDVSGDf TCHN"@KHAQ@SHNMtRDBSHNMSNB@KHAQ@SDSGDVHQDKDRR

ROD@JDQ RXRSDL SN XNTQ RODBHjB ROD@JDQ OK@BDLDMS @MC QNNL

orientation.

Surround Speaker LED Lighting Indication

• WHITE (Solid) : Connected

• WHITE (Slow Blinking) : Lost connection

• WHITE (Fast Blinking) : Searching for soundbar

• RED (Solid) : Charging

• RED (Blinking) : Low battery

Battery and Charging

• Each wireless surround speaker features 10 hours of playtime.

• Each wireless surround speaker will reach a charge in less than

3 hours of charging.

• Each wireless surround speaker will charge when attached to the

soundbar and the system is in STANDBY mode. The surround

speakers will stop charging when the soundbar is power ON.

• As an option, each wireless surround speaker can charge via the

USB connector, located on the bottom of the speaker.

Speaker charging

Standby Mode

1. The wireless surround speakers feature standby mode. In this

condition the speakers should automatically reconnect to the

main soundbar without any other action.

2. The wireless surround speakers automatically enter standby for

a total of 10 minutes if one presses POWER OFF on the remote

control or the soundbar top-panel buttons.

3. The wireless surround speakers automatically switch to standby

after 10 minutes of button inactivity and no audio/video play from

a connected device.

4. The wireless surround speakers automatically power off after

20 minutes of button inactivity and no audio/video play from a

connected device.

Reconnecting to the Main Soundbar

To re-connect the wireless surround speakers to the soundbar,

jQRS BNMjQL SGD L@HM RNTMCA@Q HR /.6$1 .- SGDM OQDRR SGD

RECONNECT button on the wireless surround speaker.

Reconnect to soundbar /

Power Off

3. How to use Bluetooth

2a. Press Bluetooth (BT) button on your remote control

to start Bluetooth pairing

PAIRING

2b. Choose “JBL Bar 5.1” to connect

CONNECTED

Settings Bluetooth

Bluetooth

DEVICES

JBL Bar 5.1

Now Discoverable

Connected

Other manuals for JBL Bar 5.1

Quick Start Guide30 pages

Questions and Answers:

Need help?

Do you have a question about the JBL Bar 5.1 and is the answer not in the manual?

JBL Bar 5.1 Specifications

General

RMS rated power	510 W
Audio output channels	5.1 channels
FM radio	No
Product color	Black
TV stand usage	Yes
Bluetooth version	4.2
HDMI ports quantity	3
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Docking connector type	-
Apple docking compatibility	Not supported