JBL CONTROL X User Manual

THANK YOU FOR CHOOSING THIS JBL ® PRODUCT
The JBL ® brand has been involved in every aspect of music, film recording and reproduction from live
performances to the recordings you play in the home, car, or on-the-go.
We’re confident that the JBL system you have chosen will provide every note of enjoyment that you
expected and that when you think about purchasing additional audio equipment for your home, car or
office, you will once again choose a JBL product.
The JBL Control X is an advanced indoor/outdoor* loudspeaker system that allows you to enjoy your
favorite music in remote locations around the home or in commercial spaces. To ensure trouble-free
performance, please carefully read these instructions completely before connecting or using the
system.
* Please note that while the JBL Control X is an all- weather outdoor loudspeaker, it is not waterproof.
These speakers should NOT be submerged or directly exposed to water, ice, snow or sustained
moisture. Do not spray water into the speaker’s rear port.

JBL CONTROL X Specifications

Transducers

Low Frequency Transducer	5.25" (133mm) polypropylene graphite-filled cone
High Frequency Transducer	1" (25mm) CMMD® Lite dome / High Definition Imaging Waveguide

Audio Specifications

Recommended Amp Power	20 – 100 Watts
Frequency Response (-3dB)	90Hz – 20kHz (anechoic)
Sensitivity	87dB (2.83V@1m)
Nominal Impedance	8 Ohm
Crossover Frequencies	2300Hz – 12dB/octave

Physical Specifications

Dimensions (H x W x D)	9-1/4" x 6-1/2" x 6-1/4" (235mm x 165mm x 158.8mm)
Weight	5.8 lbs (2.63 kg)
Inputs	Gold-plated 5-way binding posts