JBL Eon206P User Manual

12
Section 5: System Specications
EON206P
System
System Type: Powered mixer with 2 two-way bass-reex enclosures
Maximum SPL Output: 113 dB peak system output (pink noise)
Frequency Range (-10dB): 64Hz – 22kHz
Frequency Response (-3dB): 77Hz – 20kHz
AC input : 100 - 120 VAC, 220-240 VAC 50/60 Hz
Amplier
Design: Class D
System Power Rating: 160 Watts (2 x 80 W)
Output Connector: 2 x 1/4" TS (unbalanced) amplier outputs
Mixer
Input Connectors: 6 inputs (2 Mono Mic/Line, 2 x Stereo)
Channels
1-2 are XLR / 1/4" jack combo connectors
XLR is a mic level input, 1/4" is a line level input
3-4, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
5-6 is a 3.5 mm stereo jack
Input Impedance: Ch 1-2 Combo: XLR 40 K Ohms Balanced
Ch 1-2 Combo: TRS 40 K Ohms Balanced
Ch 3-4: TRS 20 K Ohms Balanced
Ch 3-4: RCA 5 K Ohms Unbalanced
Ch 5-6: 3.5 mm 10 K Ohms Unbalanced
Output Connectors: Monitor outputs: one pair of RCA jacks (stereo)
Signal Indicators: Limit: Yellow LED indicates limiter active condition
EQ: Individual channel Bass and Treble controls, center detent, +/-12 dB cut and boost
System Limiter: On Board DSP Limiting and Tuning
Speaker
LF Driver: 1 x JBL 326G 165 mm (6.5 in) woofer
HF Driver: 1" neodymium black mylar dome tweeter
Coverage Pattern: 100º x 80º nominal
Crossover Frequency: 2.2 kHz
Crossover Type: Passive network, 2nd order lters (-12 dB per octave)
for high pass and low pass lters
Enclosure: Polypropylene
Suspension/ Mounting: 36 mm pole socket
Handles: One on top
Grille: Powder coated perforated steel
Shipping Package
Dimensions (H x W x D):
20.9” X 27.8” x 13.4” (530mm x 705mm x 340mm)
Net Weight of System: 11.38 kg (25 lbs)

JBL Eon206P Specifications

General

Brand	JBL
Model	Eon206P
Category	Amplifier
Language	English