JBL Flip 4 User Manual

LED Behavior
Warning
JBL Flip 4 is IPX7 waterproof.
IMPORTANT: To ensure that the JBL Flip 4 is waterproof, please remove all cable connections and tightly close the
cap; exposing the JBL Flip 4 to liquids without doing so may result in permanent damage to the speaker. And do not
expose JBL Flip 4 to water while charging, as doing so may result in permanent damage to the speaker or power
source.
IPX7 waterproof is defined as the speaker can be immersed in water up to 1 m for up to 30 minutes.
SPECIFICATION
Bluetooth version: 4.2
Support: A2DP V1 .3, AVRCP V1 .6, HFP V1 .6, HSP V1 .2
Transducer: 2 x 40mm
Output power: 2 x 8WRMS
Frequency response: 70Hz – 20KHz
Signal-to-noise ratio: 80dB
Battery type: Lithiumion polymer (3.7V, 3000mAh)

JBL Flip 4 Specifications

General

Bluetooth	Yes
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Frequency range	70 - 20000 Hz
RMS rated power	16 W
Signal-to-Noise Ratio (SNR)	80 dB
Battery voltage	3.7 V
Battery capacity	3000 mAh
Power source type	Battery
Battery life (max)	12 h
Battery recharge time	3.5 h
Product type	-
Product color	White
Product design	Cylinder
Volume control	Digital
Protection features	Waterproof
International Protection (IP) code	IPX7
Driver diameter	40 mm
Number of drivers	2
Number of speakers	1
Audio output channels	- channels
Cables included	Micro-USB
Recommended usage	Universal

Weight and Dimensions

Depth	70 mm
Width	65 mm
Height	175 mm
Weight	515 g