Specication
• Model No.: Link View
• Transducer: 2 x 2” full range driver
• Output power: 2 x 10WRMS
• Frequency response: 60Hz - 20kHz
• Signal-to-noise ratio: >80dBA
• Power Supply: 100-240V~50/60Hz
• Bluetooth version: 4.2
• Bluetooth transmitter frequency range: 2402 – 2480MHz
• Bluetooth transmitter power: ≤8dBm
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472MHz
(2.4GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi transmitter power: <18dBm
• 2.4G Wi-Fi modulation: DBPSK, DQPSK, CCK, QPSK, BPSK,
16QAM, 64QAM
• Wireless network: 802.11 a/b/g/n/ac (2.4GHz/5GHz)
• 5G Wi-Fi transmitter power: <18dBm
• 5G Wi-Fi modulation: QPSK, BPSK, 16QAM, 64QAM, 256QAM
• 5G Wi-Fi transmitter frequency range: 5.15 - 5.35GHz, 5.470 - 5.725GHz,
5.725 - 5.825GHz
• Dimensions (W x H x D): 332 x 152 x 100 mm
• Net Weight: 1.3kg
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. CAN ICES-3 (B) /
NMB-3 (B).
The integrated display of the JBL Link View allows you to get things done easily.
According to the definition of networked equipment with high network availability
functionality set out in commission regulation (EU) No 801/2013 amending Regulation
(EC) No 1275/2008, the product is considered as a networked equipment with
functionality of videophone. Therefore, JBL Link View exempts from the requirements
for availability of standby/off modes, power management function and possibility of
deactivating wireless network connections, if these requirements are found, it will be
inappropriate for the intended use of the product.
JBL Link View is in compliance with the European Union energy legislation.
JBL Link View is in active standby mode once the device is plugged into a wall socket.
Active standby consumption: <4.3 Watts.
IC Caution:
User should also be advised that:
(i) the device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce
the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and
5470 - 5725 MHz shall comply with the e.i.r.p. limit: and
(iii) the maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point
operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and that these
To Next Page
Loading...
Need help?
General
