To Next Page

To Previous Page

MAKING SOUND

After connections are made, reduce the output level of the audio source (mixing console, computer recording

system, or preamp) to minimum. Set the 3 Series POWER SWITCH to the “ON position.” After a short delay

the POWER INDICATOR on the front of each speaker will illuminate and the speakers will be ready to reproduce

audio signals. Power-on connected audio equipment, and slowly advance the volume control of connected

audio equipment to achieve a suitable listening level. Balance the subwoofer in the system using the rear panel

VOLUME CONTROL on each speaker. Additional balance of bass can be achieved by adjusting the placement

of the subwoofer in the room.

Questions and Answers:

Need help?

Do you have a question about the JBL LSR305 and is the answer not in the manual?

JBL LSR305 Specifications

General