JBL ONBEAT AWAKE User Manual

Quick Setup Guide
JBL OnBeat
™
aWake
COnneCtIOnS
1. Plug the JBL OnBeat aWake’s power supply into the DC-In connector on the unit and
into a working AC power outlet. The JBL OnBeat aWake will automatically turn on. The
clock display screen will read “On” for 3 seconds and will then show “--:--”. When you
dock your device the OnBeat aWake’s clock display will synchronize with the device’s
clock and will display the current time.
DC-In Audio-In
DC In Aux In
2. If you are going to use your JBL OnBeat aWake with another audio source, plug one
end of a 3.5mm (1/8") stereo cable (not supplied) into the JBL OnBeat aWake’s Audio-In
connector, and plug the other end into the audio source’s audio out or headphone out
connector.
WeLCOme
Thank you for purchasing the JBL OnBeat
™
aWake iPad dock. This quick setup guide will
show you how to connect and set up your
dock. To download the free JBL AmpUp App
please go to the Apple App Store.
NOTE: Alarm functions described below are
only available through the JBL AmpUp app.

JBL ONBEAT AWAKE Specifications

General

Impedance	8 Ω
Frequency range	75 - 20000 Hz
RMS rated power	- W
Audio output channels	1.0 channels
Signal-to-Noise Ratio (SNR)	80 dB
Bluetooth	Yes
Headphone connectivity	-
Speaker power	6.5 W
Depth (imperial)	5 \
Width (imperial)	10.5 \
Height (imperial)	3.7 \
Dimensions (WxDxH)	267 x 127 x 94 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Product color	Black
Volume control	Digital
Apple docking compatibility	iPad, iPhone, iPod

Weight and Dimensions

Weight	910 g