2
First-time Wireless Setup
A tablet device can connect to any single PRX800 speaker without a router, but if you intend to control and
congure an entire system, an additional router is required as mentioned earlier.
Before you begin take note of the following router information:
1. SSID (wireless network name) and password – both are case sensitive
2. Router security type used (speaker setup will require this info). It is recommended to use a security
protocol for added safety
PRX800W has the option of either conguring each speaker with your router information or allowing the
application to set the network information for all speakers at one time. This process is referred to as network
provisioning.
Setting Up Single/Multiple Speakers (Provisioning) with Wi-Fi Router Info
To connect to your JBL PRX800W speakers via Wi-Fi, perform the following:
1. Download the app from www.jblpro.com then install it
2. Power on all PRX800W speakers in your setup
3. The application will display a welcome screen — select “SET UP A NEW SYSTEM”
4. Enter the name of the band and the name of the venue
5. Select NEXT
6. Select NEXT
7. Go to the back of each speaker and set it to Access Point mode by pressing and holding the CONNECT
button for 2 seconds — the CONNECT LED will begin ashing slowly
8. Select NEXT once all speakers have been set to Access Point mode (ashing slowly)
9. Go to your device’s Wi-Fi settings and select any network labeled PRX800 xx.xx.xx
10. Come back to the PRX Connect application and press NEXT
11. Enter your router’s Wi-Fi (SSID) name, the security protocol, and the router password. SSID and
Password are case-sensitive
12. As each speaker begins to connect to the router, the CONNECT LED will begin ashing rapidly then light
solid once connected. (Note you may need to repeat this step if any speaker continues to have a ashing
light)
13. After the CONNECT LEDs light solid on all speakers, you can now continue with the layout and settings
for each speaker and the entire show
14. For more details on the show setup and additional features, please see the complete application manual
at www.jblpro.com
To Next Page
Loading...
Need help?
General
