IMPORTANT: To ensure that the JBL Pulse 3 is waterproof, please remove all cable connections and tightly close
the cap; exposing the JBL Pulse 3 to liquids without doing so may result in permanent damage to the speaker. And
do not expose JBL Pulse 3 to water while charging, as doing so may result in permanent damage to the speaker or
power source.
IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.
Specification
Bluetooth version: 4.2
Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
Transducer: 3 x 40mm
Output power: 20W
Frequency response:65Hz – 20kHz
Signal-to-noise ratio: ≥80dB
Battery type: Lithium-ion polymer (3.7V, 6000mAh)
Battery charge time:4.5 hours @ 5V 2.3A
Music playing time: up to 12 hours (varies by volume level and audio content)
Bluetooth transmitter power:0 – 9dBm
Bluetooth transmitter frequency range: 2.402 – 2.480GHz
Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
Dimensions (H x W x D):223 x 92 x 92 (mm)
Weight: 960g
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by HARMAN International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.
File Downloads