www.jbl.com
13
ENGLISH
STUDIO 190 FLOORSTANDING SPEAKER
Speaker type: Three-way dual-woofer, floorstanding
Low-frequency transducer: Two 6-1/2" (165mm) PolyPlas™ cones, magnetically shielded
Midrange transducer: 4" (100mm) PolyPlas cone, magnetically shielded
High-frequency transducer:
1" CMMD
®
Lite dome, magnetically shielded, in a Bi-Radial
®
constant-directivity waveguide
Power handling: 100 watts (continuous); 400 watts (peak)
Frequency response: 40Hz – 22kHz
Nominal impedance: 8 ohms
Sensitivity (2.83V/1m): 90dB
Crossover frequencies: 800Hz, 3.2kHz, 6dB/octave
Enclosure type: Ported, with midrange subenclosure
Connector type: Dual gold-plated binding posts (bi-wire capable)
Dimensions (H x W x D): 44-1/8" x 7-7/8" x 14-3/4" (1121mm x 200mm x 375mm)
Weight: 48.8 lb (22.1kg)
STUDIO 180 FLOORSTANDING SPEAKER
Speaker type: Three-way floorstanding
Low-frequency transducer: 6-1/2" (165mm) PolyPlas cone, magnetically shielded
Midrange transducer: 4" (100mm) PolyPlas cone, magnetically shielded
High-frequency transducer:
1" CMMD Lite dome, magnetically shielded, in a Bi-Radial
constant-directivity waveguide
Power handling: 90 watts (continuous); 360 watts (peak)
Frequency response: 45Hz – 22kHz
Nominal impedance: 8 ohms
Sensitivity (2.83V/1m): 89dB
Crossover frequencies: 1.1kHz, 2.5kHz, 6dB/octave
Enclosure type: Ported, with midrange subenclosure
Connector type: Dual gold-plated binding posts (bi-wire capable)
Dimensions (H x W x D): 40" x 7-7/8" x 13-1/8" (1016mm x 200mm x 333mm)
Weight: 38.6 lb (17.5kg)
SPECIFICATIONS
To Next Page
Loading...
Need help?
General
