5
*) Light bulbs not included.
• Ready-to-use, pre-assembled lamp kit for safe operation of JBL Reptil Desert L-U-W Light
and JBL Reptil Jungle L-U-W Light, as well as other metal halide lamps in terrariums.
• Electronic ballast can be switched for operation with 35 W, 50 W and 70 W metal halide
lamps.
• Red special cable between ballast and lamp socket in high-voltage resistant design.
• Quick coupling for easier assembly. All you need to do is drill a hole.
• Sturdy joint for continuously variable adjustment of the lamp angle.
• Automatic switch-o in case of defective metal halide lamps.
• Automatic shut o in case of ballast overheating.
230 V, 50 Hz, E27, for metal halide lamps 35 W, 50 W and 70 W.
Description of the product
Pre-assembled lamp kit for the safe operation of JBL Reptil Desert L-U-W Light and JBL Reptil Jungle
L-U-W Light lamps as well as other 35W, 50W and 70W metal halide lamps.
Designation of the product‘s components (Fig.
)
1
Ballast
2
Selector switch for lamp intensity (Fig.
)
3
2 m mains cable to the ballast unit, 3-core
4
EU safety plug
5
Special E27 lamp socket, temperature resistant up to 270 °C, tested for 5 kV ignition voltage
6
High-voltage resistant red special cable between ballast and lamp socket.
7
Quick coupling
8
Threaded tube
9
Joint
10
Strain relief
11
Illuminants. Metal halide lamps, also called halogen metal halide lamps or HID lamps.
Intended use
• The product is intended exclusively for the illumination of terrariums.
• The product is intended for private use only and is not suitable for commercial use.
• Use the product only as described in these instructions for use. Any other use is considered
improper and may result in damage to property or personal injury.
JBL
TempSet
Unit L-U-W Multi
Bulb Holder Kit * for metal halide lamps in terrariums
de
en
fr
nl
it
dk
es
sv
cs
pl
ru
pt
To Next Page
Loading...
Need help?
General