About the Product
Product and Component Identification
11 9831/2900-4 11
Figure 5.
A Engine data label
The data label includes the engine identification number. The engine identification number has 15 digits and
must be read from left to right. For example, GN82691U969759B.
Table 2. Explanation of the engine identification number
Digit Description
1 to 2 Engine family and type code.
3 to 7 Build list number.
8 Country of manufacture code.
9 to 14 Engine serial number.
15 Year of manufacture code.
Operator Protective Structure
WARNING Machines with a ROPS, FOPS,FOGS or TOPS are equipped with a seat belt. The ROPS,
FOPS,FOGS or TOPS is designed to give you protection in an accident. If you do not wear the seat belt you
could be thrown off the machine and crushed. You must wear a seat belt when using the machine. Fasten
the seat belt before starting the engine.
WARNING Do not use the machine if the falling objects protection level provided by the structure is not
sufficient for the application. Falling objects can cause serious injury.
WARNING You could be killed or seriously injured if you operate a machine with a damaged or missing
ROPS/FOPS/FOGS. If the ROPS/FOPS/FOGS has been in an accident, do not use the machine until the
structure has been renewed. Modifications and repairs that are not approved by the manufacturer may be
dangerous and will invalidate the ROPS/FOPS/FOGS certification.
ROPS and TOPS Data Plate
Machines built to the ROPS (Roll-Over Protective Structure) and TOPS (Tip-Over Protective Structure)
standards have an identification label attached to the cab/canopy. Refer to Figure 6.
Figure 6. Plate
A ROPS and TOPS identification label
To Next Page
Loading...
Need help?
General
