20 Please see operator manual for full details.
Service/Maintenance
Daily Checks (10h) Check
Check engine for leaks and oil level Visual check
Check engine coolant for leaks, contamination and level Visual check
Check condition of cooling pack and system Visual check
Check hydraulic oil level Visual check
Check the condition of welded structure Visual check
Check window washer fluid level Visual check
Check condition of bodywork and framework Visual check
Check condition of attachments / optional equipment Visual check
Grease attachments / optional equipment as required Lubricate
Check for excessive exhaust smoke Visual check
Check fuel system for leaks & contamination Visual check
Check operation of all services i.e. excavator, dozer etc. Operate
Check operation of all electrical equipment i.e horn, alarms etc. Operate
Check the track and running gear operation Operate
Check operation of the hour meter Viual check
Weekly Checks (50h) Check
Clean cooling pack Clean
Drain water from water separator on fuel filter Clean
Check condition of drive belt Visual check
Check hydraulic hoses / pipework for leaks and damage Visual check
Check condition of the rams Visual check
Check the condition of the electrical wiring Visual check
Clean the battery terminals Clean
Check condition and tension of tracks Visual check
Check presence of all pivot pin retaining bolts Visual check
Grease slew ring bearing Lubricate
Grease window and door hinges Lubricate
To Next Page
Loading...
Need help?
General
