About the Product
Product and Component Identification
10 9821/9100-5 10
Product and Component Identification
Machine
Machine Identification Plate
Your machine has an identification plate mounted as shown. The serial numbers of the machine and its major
units are shown on the plate.
The machine model and build specification is indicated by the PIN (Product Identification Number)
The serial number of each major unit is also shown on the unit itself. If a major unit is replaced by a new one,
the serial number on the identification plate will be wrong. Either get a replacement identification plate from
your JCB Dealer or simply remove the old number. This will prevent the wrong unit number being quoted when
replacement parts are ordered. The machine and engine serial numbers can help identify exactly the type of
equipment you have.
Figure 4.
Typical Product Identification Number
The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read
from left to right.
Table 1. Typical PIN
JCB 5A4 1 R C 12345678
Table 2.
Digit 1 to 3 World Manufacturer Identification
JCB United Kingdom
GEO Georgia, US
HAR Haryana, India
SOR Sorocaba, Brazil
GET Gatersleben, Germany
PUN Pune, India
SHA Shanghai, China
JBP JCB Branded Products
Table 3.
Digit 4 to 6
Machine model and type
To Next Page
Loading...
Need help?
General
