jcb 527-58 T4F User Manual

About the Product
Description
8 9831/2450-3 8
Description
General
The JCB Loadall is a self propelled, seated operator, wheeled machine for operation on unimproved natural
terrain and disturbed terrain.
A main structural support is designed to carry an extending boom with a carriage mounted on the front to which
forks or an approved attachment can be fitted.
When used normally the machine lifts and places loads by extending/retracting, raising/lowering the boom.
Intended Use
The machine is intended to be used in normal conditions for the applications described in this manual. If the
machine is used for other applications or in dangerous environments, for example in a flammable atmosphere
or in areas with dust containing asbestos, special safety regulations must be obeyed and the machine must
be equipped for use in these environments.
Make sure you follow the instructions outlined in the operator’s manual of the mounted or trailed machinery
or trailer. Do not operate the combination tractor-machine or tractor-trailer unless all instructions have been
followed.
Log Moving/Object Handling
Do not use the machine to move or handle logs unless sufficient log protection is installed. You could cause
serious injury to yourself and damage to the machine. For more information, contact your JCB dealer.
Optional Equipment and Attachments
A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB
approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list
of approved attachments available.
Danger Zone
The danger zone is any zone within and/or around the machinery in which a person is subject to a risk to their
health or safety. The danger zone includes the area in immediate proximity to any hazardous moving parts,
areas into which working equipment and attachments can be moved to quickly, the machine normal stopping
distances and also areas into which the machine can quickly turn under normal conditions of use. Depending
on the application at the time, the danger zone could also include the area into which debris, from use of an
attachment or working tool, could be projected and any area into which debris could fall from the machine.
During the operation of the machine, keep all persons out of the danger zone. Persons in the danger zone
could be injured.
Before you do a maintenance task, make the product safe, stopping operation, isolating the controls and turning
off the engine.
Main Component Locations

jcb 527-58 T4F Specifications

General

Brand	jcb
Model	527-58 T4F
Category	Compact Loader
Language	English

Summary

Foreword

The Operator's Manual

Importance of reading and understanding the operator's manual for safe operation.

Machine Delivery and Installation

Explains the importance of dealer representative explanation for new machine operations and functions.

Introduction

About this Manual

Provides information about the manual's structure, content, and usage guidelines.

Model and Serial Number

Details how to identify the machine model and serial numbers for the JCB machine range.

Using the Manual

Instructions on how to read and understand the manual for safe operation and maintenance.

Introduction

Cross References

Explains how cross-references are presented in the manual for easy navigation.

Safety

Safety - Yours and Others

Emphasizes the potential hazards of machinery and the importance of operator awareness and safety.

Safety Warnings

Defines signal words like DANGER, WARNING, CAUTION, and Notice used in safety messages.

Safety

General Safety

Covers training, care, alertness, clothing, alcohol/drugs, feeling unwell, mobile phones, and lifting equipment safety.

Safety

Clothing and Personal Protective Equipment (PPE)

Advises on appropriate clothing and PPE to prevent injury from machinery.

About the Product

Introduction

Guidance on familiarizing oneself with the machine's controls, gauges, and pedals.

General

Basic information about operating the machine and identifying its components.

Name and Address of the Manufacturer

Identifies JCB Excavators Limited as the manufacturer.

Product Compliance

Discusses compliance with laws and regulations for new and pre-owned products.

About the Product

Description

A general overview of the JCB Loadall's purpose, design, and operation.

Intended Use

Specifies the normal operating conditions and applications for the machine as described in the manual.

Log Moving/Object Handling

Safety advice regarding handling logs or objects, requiring specific protection.

Optional Equipment and Attachments

Information on available optional attachments to increase machine versatility.

About the Product

Product and Component Identification

Details how to identify the machine and its major components using identification plates.

Machine Identification Plate

Describes the location and information found on the machine's identification plate.

Typical Product Identification Number

Explains the structure and meaning of the Product Identification Number (PIN).

About the Product

Engine

Information about engine data labels, identification numbers, and injector codes.

About the Product

Axle(s)

Details on serial numbers stamped on data plates for the front and rear axles.

About the Product

Gearbox

Information regarding serial numbers stamped on data plates for the gearbox.

About the Product

Operator Protective Structure

Information about the operator protective structure and its importance for safety.

About the Product

ROPS/FOPS Certification Plates

Details on certification plates for Roll-Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS).

About the Product

Safety Labels

Explains the purpose and placement of safety labels on the machine.

Safety Label Identification

Guides on identifying specific safety labels and their meanings.