Technical Data
Static Dimensions
160 9821/6100-4 160
Visibility Diagrams
Figure 117. Visibility Map- 8020 CTS
1m Rectangular Boundary from Machine
The visibility map provided in this manual is for guidance, and may be used to improve visibility or as part of a
risk assessment for work site safe operation, introduction of additional visual aids or site management. Refer
to: Risk Assessment (Page 23).
The visibility map shown within this manual is to scale with the machine in travel position.
The visibility map shows the approximate blind spots of direct vision from a test object 1.2m high and 0.3m
wide. The operator's eye position is 0.68m above and 0.02m in front of the Seat Index Point and an eye
To Next Page
Loading...
Need help?
General
