Section 1 - General Information
Identifying Your Machine
Identification Plates
1-3 1-3
9803/9360-4
Identifying Your Machine
Identification Plates
Machine Identification Plate
Your machine has an identification plate mounted as
shown. The Product Identification Number (PIN), weight,
engine power, year of manufacture and serial number of
the machine are shown on the plate.
Note: The machine model and build specification is
indicated by the PIN. Refer to Typical Product
Identification Number (PIN).
If the engine is replaced by a new one, the serial number
on the identification plate will be wrong. Either get a
replacement identification plate from your JCB Dealer or
simply remove the old number. This will prevent the wrong
unit number being quoted when replacement parts are
ordered.
The machine and engine serial numbers can help identify
exactly the type of equipment you have.
Fig 1.
Typical Vehicle Identification Number
(VIN)
1 World Manufacturer Identification (JCB)
2 Machine Type and Model (08045 = 8045)
3 Random Check Letter
4 Year of Manufacture ( 6 = 2006, 7 = 2007, 8 = 2008,
9 = 2009)
5 Product Identification Number (1226501)
Typical Product Identification Number
(PIN)
1 World Manufacturer Identification (3 Digits).
JCB = UK Build.
2 Machine Type and Model (5 Digits).
08040 = 8040.
3 Random Check Letter (1 Digit).
The Check Letter is used to verify the authenticity of
a machine’s PIN.
4 Machine Serial Number (8 Digits).
Each machine has a unique serial number.
S
YEAR OF MANUF.
T
PIN Prod.Ident. No.
ENGINE POWER kW @ RPM
E
I
F
VIN Vehicle Ident. No.
E
R
I
R
M
R
WEIGHT Kg
G
E
D
JCB COMPACT PRODUCTS LIMITED
HAREWOOD ESTATE, LEEK ROAD,
CHEADLE, STOKE ON TRENT,
UNITED KINGDOM, ST10 2JU.
1234 5
JCB 08045 L 7 1226501
123 4
JCB 08040 L 01056000
To Next Page
Loading...
Need help?
General
