About the Product
Console Switches
17 9821/7950-3 17
Console Switches
General
The installed switches and their positions can change according to the specification of the machine.
Each switch has a graphic symbol to show the function of the switch. Before you operate a switch, make sure
that you understand its function.
The rocker switches have two or three positions (as shown).
If the switch has a backlight, then the graphic symbol illuminates when the ignition switch or side lights are
in the on position.
The light bar illuminates to show that the switch function is active.
Figure 12.
A Graphic symbol
B Light bar
Road Lights
Three position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Off
Position : 2 = Side lights on
Position : 3 = Headlights on
Rear Fog Lights
Two position rocker switch. The switch functions operate when the ignition switch is in
the on position and the headlights are on.
Position 1: Off
Position 2: Rear fog light on
Hazard Warning Lights
Two position rocker switch. The switch functions operate when the ignition switch is
in the on and off positions.
Position : 1 = Off
Position : 2 = On. A light on the instrument panel flashes with the outside lights.
To Next Page
Loading...
Need help?
General
