1 - 1
Section 1 General Information
9803/8030
Section 1
1 - 1
Issue 3*
417490
S
P
X
R
M
N
Serial Number Plate
Each machine has a serial number plate located at X. The 17
digit Vehicle Identification Number (VIN), and the serial
numbers of the engine and transmission are stamped on the
plate.
Typical Vehicle Identification No. (VIN)
Original VIN Configuration
Later VIN Configuration
A = Manufacturing Code
B = Machine Range
FT = Fastrac
C = Engine Type
17 = 3190 or 3190 Plus
18 = 3220 or 3220 Plus
19 = 3170 or 3170 Plus
23 = 3200 or 3200 Plus
24 = 3230 or 3230 Plus
D = Transmission Type (Gearbox and axle combination)
3170, 3170 Plus All other machines
A = 75 km/h 8 = Standard (40, 50 or 65 km/h)
B = 65 km/h 9 = High Speed (75 km/h)
D = 50 km/h
E = 40 km/h
E = Vehicle Max. Speed
40 = 40 km/h
50 = 50 km/h
65 = 65 km/h
75 = 75 km/h
F = Serial Number
G = Authenticity Code
H = year Code (e.g. 6 = 2006)
Unit Identification
The serial number of each major unit is also stamped on the
unit itself as shown below. If a major unit is replaced by a
new one, the serial number on the plate will be wrong. Either
stamp the new number of the unit on the identification plate,
or simply stamp out the old number. This will prevent the
wrong unit number being quoted when replacement parts
are ordered.
Engine M
Gearbox Assembly (assembly of all three gearboxes) N
Speed Gearbox P
Front Axle R
Rear Axle S
*
*
To Next Page
Loading...
Need help?
General
