To Next Page

To Previous Page

01 - Machine

03 - Safety

27 - Maintenance Positions

01 - 12 9813/2650-3 01 - 12

27 - Maintenance Positions

Introduction

JS145W, JS160W, JS175W, JS200W

Machines

1. Park the machine on solid, level ground, with the

upper structure parallel to the undercarriage.

2. If necessary, lower the dozer blade.

3. Lower the excavator so the dipper is flat on the

ground.

Figure 2.

A Excavator lowered with the dipper flat on the

ground

4. Stop the engine.

5. Remove the ignition key.

6. Release the hydraulic pressure and the tank

pressure. Refer to (PIL 30-00-00).

7. Isolate the battery to prevent the accidental

operation of the engine. Refer to (PIL 33-03-03).

JS20 MH, JS200 Wastemaster Machines

1. Park the machine on solid, level ground, with the

upper structure parallel to the undercarriage.

2. Lower the lift arm so the dipper is flat on the

ground.

Figure 3.

A Lift arm lowered with the dipper flat on the