Section 1 - General Information
Torque Settings
Hydraulic Connections
1-34 1-34
1-05-01 Issue 02
Table 12.
Assembly Torques for UNF Threads on the ORFS Fittings
Product Thread size Series
T Assembly torque
Series Port dash size ISO 11296 Non-adjustable end Adjustable end
Inch Nm Nm
Port connections males stud
and swivel fittings
-4 7/16-20 UNF 35 35
-5 1/2-20 UNF 40 40
-6 9/16-18 UNF 46 46
-8 3/4-16 UNF 80 80
-10 7/8-14 UNF 135 135
-12 1.1/16-12 UNF 185 185
-16 1.5/16-12 UNF 270 270
-20 1.5/8-12 UNF 340 340
-24 1.7/8-12 UNF 415 415
Dash size of tube
or hose ends
UNF thread size Flats from wrench
resistance
Swivel nut torque
Nm (Ref)
Hose ends ORFS female swivel -4 9/16-18 UNF 1/2 to 3/4 26
-6 11/16-16 UNF 1/2 to 3/4 42
-8 13/16-16 UNF 1/2 to 3/4 57
-10 1-14 UNF 1/2 to 3/4 85
-12 1. 3/16-12 UNF 1/3 to 1/2 122
-16 1.7/16-12 UNF 1/3 to 1/2 156
-20 1.11/16-12 UNF 1/3 to 1/2 200
-24 2-12 UNF 1/3 to 1/2 256
-32 2.1/2-12 UNF
To Next Page
Loading...
Need help?
General
