About the Product
Safety Labels
13 9831/1100-6 13
Figure 11.
Table 3. Safety Labels
Item Part No. Description Qty.
A 332/J2896 (Combination label) The coolant is under pressure. Risk of severing of
hands/fingers in the rotating parts. Hot surfaces. Remove the ignition key
and refer to the operator's manual and the service manual.
1
B 817/70005 Hot fluid under pressure. Do not touch, consult operator's manual. 1
C 332/P4679 Severing of hands and fingers. Keep clear of/do not reach into rotating
parts. Read the Service Manual.
1
D 817/70024 Warning. Do not use as a step. 1
E 817/70003 Crushing/shearing of hands. Do not touch. 1
F 334/K3643 Unexpected machine movement due to accidental contact with the
controls when the hydraulics are not isolated. Before exiting the cab leave
the machine in a parked state and remove the ignition key. Refer to
Stopping and Parking section in the operator’s manual.
1
G 817/18541 Read the operator's manual before you operate the machine. 1
H 817/19470 The arm or bucket may move, keep clear. 1
J 332/J9693 (Combination label) The bucket can foul the boom when dipper is swinging
inwards. Maintain the clearance between the bucket and boom. Danger
of collision, maintain the clearance between the bucket and cab. Risk of
tripping, raise the control lock lever before you exit the machine. Risk of
injury by crushing, do not lean out of the window. Risk of electrocution,
1