About the Product
Console Switches
18 9831/1450-1 18
Control Locks
Controls isolation switch. Two position momentary rocker switch. The switch functions
when the engine is running, and the controls isolation lever is lowered. Press
momentarily to isolate the controls, the switch light illuminates. Press momentarily
again to enable the controls, the switch light extinguishes.
Position : 1 = Rest position. Switch light illuminates when the controls are isolated
Position : 2 = Momentary position.
Radio Mute
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Radio is on
Position : 2 = Radio is muted.
Engine Stop Switch
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Engine run
Position : 2 = Engine stop. Engine cannot be cranked.
Slew Lock
Two position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Slew available.
Position : 2 = Slew locked. There is a delay period (up to 20 seconds) between
applying the lock by pressing the slew lock switch and the slew lock brake
application on the slew motor. Ensure the slew lock has engaged fully before any
operation requiring the slew to be locked.
Window Washer
Two position momentary rocker switch. The switch functions when the ignition switch
is in the on position. The window washers will operate as long as the switch is held
in the momentary position. The upper wiper will operate automatically as the window
is washed.
Position : 1 = Off. Window washers are off.
Position : 2 = Momentary position. Window washers are on.
Window Wipers
Three position rocker switch. The switch functions operate when the ignition switch is
in the on position.
Position : 1 = Off
Position : 2 = Upper wiper intermittent on
Position : 3 = Upper wiper continuous on.
To Next Page
Loading...
Need help?
General
