jcb S4550E User Manual

Operation
Slopes
26 9831/3200-3 26
Slopes
General
WARNING Make sure that you have been trained and are familiar with the use of machines on slopes, and
understand the adverse affects that slopes and site conditions can have on stability. Never use the machine
on a slope if you do not understand the recommended practices for the use of machines in such applications.
There are a number of factors which can adversely affect the stability of the machine and the safety of the
machine and operator when used on a slope.
It is essential that a risk assessment of the work to be done is completed and that the operator complies with
any safety precautions that the assessment identifies.
Driving on Slopes
WARNING If the tilt indicator warning light/alarm is activated while driving with platform raised, lower the
platform and drive to a smooth firm level surface.
While driving on slopes with the platform fully stowed make sure that the front/back and side slope does not
exceed the rated gradient for the machine. Refer to: Performance Dimensions (Page 90).
Figure 15.
B
A
A Front/back slope B Side slope
While driving on slopes with the platform raised make sure that front/back slope and side slope does not exceed
the angles specified.
Front/back slope 3°
Side slope 1.5°

jcb S4550E Specifications

General

Brand	jcb
Model	S4550E
Category	Scissor Lifts
Language	English