01 - Machine
00 - Introduction
04 - Product Compliance
01 - 4 9806/4300-5 01 - 4
04 - Product Compliance
Introduction
Your JCB product was designed to comply with
the laws and regulations applicable at the time
of its manufacture for the market in which it was
first sold. In many markets, laws and regulations
exist that require the owner to maintain the product
at a level of compliance relevant to the product
when first produced. Even in the absence of defined
requirements for the product owner, JCB recommend
that the product compliance be maintained to ensure
safety of the operator and exposed persons and to
ensure the correct environmental performance. Your
product must not be altered in any way which could
affect or invalidate any of these requirements. For
advice consult your JCB dealer.
For its compliance as a new product, your JCB
and some of its components may bear approval
numbers and marking's, and may have been
supplied with a Declaration/Certificate of Conformity.
These marking's and documents are relevant only for
the country/region in which the product was first sold
to the extent that the laws and regulations required
them.
Re-sales and import/export of products across
territories with different laws and regulations can
cause new requirements to become relevant for
which the product was not originally designed or
specified. In some cases, pre owned products
irrespective of their age are considered new for the
purposes of compliance and may be required to
meet the latest requirements which could present an
insurmountable barrier to their sale/use.
Despite the presence of any compliance related
marking's on the product and components, you
should not assume that compliance in a new market
will be possible. In many cases it is the person
responsible for import of a pre owned product into a
market that becomes responsible for compliance and
who is also considered the manufacturer.
JCB may be unable to support any product
compliance related enquiry for a product which
has been moved out of the legislative country/
region where it was first sold, and in particular
where a product specification change or additional
certification would have been required in order for the
product to be in compliance.
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
