Initial Inspection
I
nspect the shipping container for damage. If the shipping container,
packing material, amplifier or accessories are damaged or missing, notify
your dealer and the shipper (if a claim is to be made). Note: Many shippers
require notification and an inspection within twenty-four (24) hours of
delivery to ascertain the nature of damages incurred.
Your Model 8T/Ti Amplifier has undergone extensive performance
evaluations, listening tests, quality control inspections and a minimum
seventy-two (72) hour burn-in period prior to shipment and should be in a
perfect operational condition upon receipt. If the Amplifier does not operate
correctly, please notify your dealer immediately.
We strongly suggest that you save all packing materials. If the Amplifier is
returned to your dealer or Jeff Rowland Design Group, the original packing
materials must be used for shipment. Neither Jeff Rowland Design Group
nor the shipper can be held responsible for damages incurred during transit
if the original factory packing is not used. All factory returns require that a
Return Authorization number be issued by Jeff Rowland Design Group prior
to shipment.
Contents
E
nsure that all of the auxiliary components listed below are enclosed
within the accessory box. Refer to the diagrams illustrated above and verify
the components included.
1 AC power cable
2 Four (4) spiked coupling interface supports
3 Four (4) compliant isolation interface supports
4 One (1) speaker terminal hand wrench (7/16 inch)
5 One (1) warranty card (in some countries warranties are provided by
the respective importer)
Initial Inspection / Contents
To Next Page
Loading...
Need help?
General
