15
iPod OPERATION
This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following iPod versions are supported:
iPod Nano 5G, 6G, 7G
iPod Classic
iPhone 4, 4S, 5
iPod Touch 3G, 4G, 5G
NOTE: Earlier model iPods are not supported because they do not implement the USB
control protocol. These unsupported iPod models may be connected to the radio using
one of the Auxiliary Inputs.
NOTE: iPod sold separately.
Accessing iPod Mode
Connect a supported iPod or iPhone to the front panel USB connector. The iPod icon illuminates
in the bottom left corner of the LCD whenever an iPod or iPhone is attached to the USB
connector. Music playback begins automatically. To enter iPod mode from any other source,
press the MODE button (4) until “iPod” appears on the display. If the user connects an iPod
containing no songs, the radio will display a message stating “No Songs” in iPod mode.
Turning the iPod On/Off
The iPod power turns on automatically when it is connected to the front panel USB port, as long
as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the
ignition off. When the ignition is off, the iPod will pause and then enter sleep mode after 2
minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself.
Controlling Playback
Pausing Playback
During playback, press the MUTE/>|| button (22) to
pause the iPod player. “Pause” will appear
on the LCD. Press MUTE/>|| again to resume
playback.
Repeat Play
During playback, press the 1/RPT button (8) to
repeat the current song. “RPT” will appear on the
LCD. Press 1/RPT again to stop repeat playback.
Random Play
During playback, press the 3/RDM button (5) to
play all songs in the current category in random
order. Random play will begin once the current song has finished playing. “RDM” will appear on
the LCD. Press 3/RDM again to stop random playback.
Selecting Tracks
During playback, press the TUNE/SEEK |<< / >>| buttons (18, 19) to play the previous or next
track in the current category. Press the TUNE/SEEK |<< button (18) once to play the song from
the start position or press TUNE/SEEK |<< twice to play the previous track. Pressing the
TUNE/SEEK |<< button (18) during the first 2 seconds of a track will play the previous track.
After 2 seconds, this action returns to the beginning of the current track.
Press and hold the TUNE/SEEK |<< / >>| button (18, 19) to fast reverse/forward the song.
NOTE: If you press and hold the TUNE/SEEK |<< / >>| button to change the current song
to the previous/next song, you will exit fast reverse/forward mode.
Playlist Search
Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category
mode, press the TUNE/SEEK |<< / >>| buttons (18, 19) to choose file search by Playlist, Artist,
Album, Genre, Song, Audiobook or Podcast. Press the INFO/ENTER button (16) to select the
search mode. Use the TUNE/SEEK |<< / >>| buttons to search the available files on the iPod.
Press the INFO/ENTER button to play the selected song or file.
Alternate Display Mode
Press the DISP/SCROLL button (12) to change the display information between single and
double line text display.
To Next Page
Loading...
Need help?
General
