Jensen VM9022 - User Manual

Other manuals for Jensen VM9022

Questions and Answers

N
Nicole BriggsSep 8, 2025
Why Jensen Car Receiver disc does not play back?
- R
  Randy MosleySep 9, 2025
  If a disc does not play back on your Jensen Car Receiver, use a disc in good condition if the current disc is warped or scratched. Clean the disc with a soft cloth if it is dirty or wet. Clean the laser pickup with a cleaning disc if it is dirty. Use a compatible disc if an incompatible disc is used. Change the Parental Lock settings to a lower restriction if the disc rating exceeds the Parental Lock rating limit. Use a disc with the proper region code if the disc region code is not compatible with the unit. Insert the disc with the label side up if the disc is inserted upside down.
L
Luis JonesAug 23, 2025
What to do if there is no/low audio output from Jensen Car Receiver?
- M
  Manuel LoweAug 23, 2025
  If there is no or low audio output from your Jensen Car Receiver, check the wiring and correct any improper audio output connections. Increase the volume level if it is set too low. Review the wiring diagram and check the “MUTE” connection. Replace the speakers if they are damaged. Adjust the channel balance to the center position if it is heavily biased. Insulate all speaker wiring connections if they are in contact with a metal part of the car.
K
Kimberly Jones DDSAug 25, 2025
How to fix poor sound quality or distortion on Jensen VM9022?
- S
  Sharon RichAug 26, 2025
  To fix poor sound quality or distortion on your Jensen Car Receiver, use an original copy of the disc if a pirated disc is in use. Connect proper speakers if the speaker power rating is not compatible with the unit. Check the speaker contact if the speaker is shorted.
J
Joshua GreenAug 26, 2025
What to do if Jensen Car Receiver remote control does not function?
- R
  Robert KellyAug 27, 2025
  If the remote control for your Jensen Car Receiver does not function, replace the battery with a new one if the battery is depleted. If the battery is installed incorrectly, remove it and install it correctly.
S
snyderstevenAug 27, 2025
Why Jensen VM9022 unit resets itself when engine is off?
- L
  Linda LopezAug 27, 2025
  If your Jensen Car Receiver resets itself when the engine is off, check the wiring between the ACC and positive battery wire and correct it if the connection is incorrect.
K
Kaitlyn MendozaSep 22, 2025
Why can't I see video and photo media on Jensen Car Receiver TFT screen?
- G
  Gregory DavisSep 22, 2025
  If you cannot see video and photo media on your Jensen Car Receiver TFT screen, change the iPod video settings to TV Out = On if there are wrong iPod Video Settings.
J
Joshua ColeSep 16, 2025
Why is Jensen VM9022 satellite source not available?
- C
  christopherdawsonSep 16, 2025
  If the satellite source is not available on your Jensen Car Receiver, check the Satellite Data cable for incorrect cable connections.
G
Gina HigginsSep 18, 2025
Why is Jensen Car Receiver iPod source not available?
- J
  Judy ThomasSep 18, 2025
  If the iPod source is not available on your Jensen Car Receiver, check the jLink and MediaLink cables for incorrect cable connections.
L
liwendySep 7, 2025
What to do if you cannot insert disc into Jensen Car Receiver?
- T
  Thomas MahoneySep 7, 2025
  If you cannot insert a disc into your Jensen Car Receiver, eject the current disc and insert a new one, as there might be a disc already inside the unit.
M
Mr. Jason Johnson MDSep 4, 2025
What to do if Jensen Car Receiver monitor stops at incorrect position?
- J
  Jessica RileySep 4, 2025
  If the monitor of your Jensen Car Receiver stops at an incorrect position, press the OPEN key to restart monitor movement if the moving path is blocked.

Jensen VM9022 Specifications

General

Display Size	6.2 inches
Resolution	800 x 480
Touchscreen	Yes
Bluetooth	Yes
USB Port	Yes
SD Card Slot	Yes
Radio Tuner	AM/FM
DVD Player	Yes
Rear Camera Input	Yes
Peak Output	50 watts
Compatible Formats (Audio)	MP3, WMA
Video Playback Formats	DVD, MP4
Power Output	50W x 4 Channels