Section I: Safety
Page 9
5-376-000102
REV. 1 - 07/10
• Jog the winch control lever to be sure of
complete engagement of the clutch gears
before making a lift or pull.
• Never stand on or straddle a working wire
rope.
• Take up the wire rope slowly and be sure
the hook is securely set.
• Be sure of your lift or pull and do not exceed
the working strength of the wire rope or hook.
Rig to keep the estimated amount of pull
well within equipment ratings. Use wire rope
breaking strength ratings only for selecting
replacement wire rope.
BOOM SAFETY
Your MPL is equipped with a recovery winch and the following safety
procedures must be observed:
To Next Page
Loading...
Need help?
General
